This device is used to copy and duplicate the 125 Khz EM4100 / EM410X card /tag ID for backup purpose.(HID standard NOT compatible!).
Name: Handheld second generation induction buckle copy machine
Material:Acrylonitrile Butadiene Styrene(ABS)
Dimension: 71 x 117 x 31mm
Supported blank tag: T5557,EM4305.
Working frequency: 125Khz
Power: Two piece AAA battery, it can be use 20,000 times.
Working status Led: Read , Power , Write
Button: Read Button, Write Button
You can copy all of the ID card, such as access cards, cell cards, parking cards.
How to clone:
1.Push power switch on the right of device, it will keep two or three times, and LED is on mean it works, if not restart please.
2.Put the other card near the antenna left of the device, and then press READ button, the device will keep and the LED is on when read successful, if beep 2 times go to step 3, if beep 3 times go to step 4, click READ again if it doesn’t beep.
3.change an new blank card as T5557/EM4305, then press WRITE button, when beep PASS LED is on mean clone successful, if it doesn’t beep and light please write again.
4.Change a blank T5557, then press WRITE button, when beep PASS LED is on mean clone successful, if it doesn’t beep and light please write again.
5.Repeat step 3 or step 4 if you want to make more same ID card.
6.Switch off for save power.
1 x Handle RFID Writer
5 x Keychain can be copied